Consider the following types of modulation:

1. Amplitude modulation

2. Frequency modulation

3. Phase modulation

4. Pulse modulation

Which of the above modulation are used for telecasting TV programs?

In TV Transmission FM is used for Audio transmission and AM for Video transmission.

Amplitude Modulation (AM) is preferred for picture transmission in TV because of the following reasons:

• The distortion which arises due to interference between multiple signals is more in FM than AM because the frequency of the FM signal continuously changes.
• Steady production of the picture is affected because of this.
• If AM were used, the ghost image, if produced is steady.
• Also, the circuit complexity and bandwidth requirements are much less in AM than in FM.

On the other hand, FM is preferred for sound because of the following reasons:

• The bandwidth assigned to the FM sound signal is about 200 kHz, of which not more than 100 kHz is occupied by significant sidebands.
• This is only 1.4 % of the total channel bandwidth of 7 MHz. This results in efficient utilization of the channel.

A wave has 3 parameters Amplitude, Phase, and Frequency. Thus there are 3 types of modulation techniques.

Amplitude Modulation: The amplitude of the carrier is varied according to the amplitude of the message signal.

Frequency Modulation: The frequency of the carrier is varied according to the amplitude of the message signal.

Phase Modulation: The Phase of the carrier is varied according to the amplitude of the message signal.