Testbook Logo
Exams SuperCoaching Test Series Skill Academy
More

Question

Download Solution PDF

A sensor requires 30 s to indicate 90% of the response to a step input. If the sensor is a first-order system, the time constant is [given, loge (0.1) = -2.3]

This question was previously asked in
ESE Electrical 2015 Paper 1: Official Paper
Attempt Online
View all UPSC IES Papers >
  1. 15 s
  2. 13 s
  3. 21 s
  4. 28 s

Answer (Detailed Solution Below)

Option 2 : 13 s
Free Tests
View all Free tests >
Free
ST 1: UPSC ESE (IES) Civil - Building Materials
6.4 K Users
20 Questions 40 Marks 24 Mins
Start Now

Detailed Solution

Download Solution PDF

The standard equation for a step input is,

c(t) = 1 – e-t/τ

Where τ is time constant.

At c(t) = 0.9 and t = 30s

⇒ 0.9 = 1 – e-30/τ

⇒ τ = 13 sec
Download Solution PDF
Latest UPSC IES Updates

Last updated on Jun 23, 2025

-> UPSC ESE result 2025 has been released. Candidates can download the ESE prelims result PDF from here.

->  UPSC ESE admit card 2025 for the prelims exam has been released. 

-> The UPSC IES Prelims 2025 will be held on 8th June 2025.

-> The selection process includes a Prelims and a Mains Examination, followed by a Personality Test/Interview.

-> Candidates should attempt the UPSC IES mock tests to increase their efficiency. The UPSC IES previous year papers can be downloaded here.

More Time Response of the First and Second Order System Questions

Q1.A second-order system has a transfer function given by \(G(s)=\frac{25}{s^2+8 s+25}\). If the system, initially at rest, is subjected to a unit-step input at t = 0, the second peak in the response will occur at
Q2.The impulse response of e-3t is :
Q3.The unit step response of a system is [1 − e−t(1 + t)] u(t). The system is
Q4.The impulse response of an LTI system is given as : \(\rm {h[n] = \left\{ \begin{matrix} \frac{\omega_c}{\pi} & n = 0 \\\ \frac{\sin \omega_c n}{\pi n} & n \ne 0 \end{matrix} \right.}\) It represents an ideal
Q5.The impulse response of a system is h(t) = t u(t) . For an input u(t - 1) , the output is
Q6.In control systems, if 'G' is the gain then Damping varies with:
Q7.Two discrete time systems with impulse responses ht[n] = δ[n - 1] and h2[n] = δ[n - 2]  are connected in cascade. The overall impulse response of the cascaded system is
Q8.Direction: Question consists of two statements, one labelled as the 'Assertion (A)' and the other as 'Reason (R)'. Examine these two statements carefully and select the answer to this question using the codes given below: Assertion (A): A linear system gives a bounded output if the input is bounded. Reason (R): The roots of the characteristic equation have all negative real parts and the response due to initial conditions decay to zero as time t tends to infinity.
Q9.If the response of LTI continuous time system to unit step input is \(\left( {\frac{1}{2} - \frac{1}{2}{e^{ - 2t}}} \right)\), then impulse response of the system is

More Time Response Analysis Questions

Q1.Consider a causal second-order system with the transfer function \(G(s)=\frac{1}{s^2+2 s+1}\) with a unit-step \(R(s)=\frac{1}{s}\) as an input. Let c(s) be the corresponding output. The time taken by the system output c(t) to reach 94% of its steady-state value \(\displaystyle \lim _{t \rightarrow \infty} c(t)\), rounded off to two decimal places, is
Q2.The output of a standard second-order system for a unit-step input is given as \(y(t)=1-\frac{2}{\sqrt{3}} e^{-t} \cos \left(\sqrt{3} t-\frac{\pi}{6}\right)\). What is the transfer function of the system?
Q3.A second-order system has a closed-loop transfer function given by \(G(s)=\frac{25}{s^2+8 s+25}\). The settling time for 5 percentage band in tolerance error is
Q4.A second-order system has a transfer function given by \(G(s)=\frac{25}{s^2+8 s+25}\). If the system, initially at rest, is subjected to a unit-step input at t = 0, the second peak in the response will occur at
Q5.Steady state error is the value of error signal when:
Q6.A closed loop system is shown in the figure where k > 0 and α > 0. The steady state error due to a ramp input (R(s) = α/s2) is given by 
Q7.The nature of the response shown below is:
Q8.When the damping ratio ζ (zeta) lies in between 0 < ζ < 1, then the circuit classification comes under:
Q9.For a critically damped system, the type of closed loop poles are:
Q10.The time required for the response curve to reach and stay within the specified 2-5% of final value is referred to as :
Suggested Test Series
View All >
UPSC ESE (IES) Civil Mock Test Series
116 Total Tests with 1 Free Tests
Start Free Test
UPSC ESE (IES) Electrical Mock Test Series
68 Total Tests with   1 Free Tests
Start Free Test
Suggested Exams
Exam-Logo
TANGEDCO Assistant Engineer
Exam-Logo
UPSC IES

TANGEDCO Assistant Engineer Important Links

More Control Systems Questions

Q1.Explain the pattern and trend of public expenditure on social services in the post reforms period in India. To what extent this has been in consonance with achieving objective of inclusive growth? 
Q2.The Nyquist criterion for stability states that an amplifier is unstable if the Nyquist curve encloses the -1 + j0 point, and the amplifier is stable if the curve does not enclose this point. If Aβ
Q3.The phase margin of a system with the open-loop transfer function \(G(s) H(s)=\frac{1-s}{(s+1)(s+2)}\) is
Q4.The phase margin of a system having the loop transfer function \(G(s) H(s)=\frac{2 \sqrt{3}}{s(s+1)}\) is
Q5.By considering standard notations, the peak value of the magnitude in the resonant peak Mr is
Q6.The magnitude of frequency response of an underdamped second-order system is 5 at 0 rad/sec and peaks at \(\frac{10}{\sqrt{3}}\) at 5√2 rad/sec. The transfer function of the system is
Q7.A system has poles at 0.01 Hz, 1 Hz and 80 Hz; zeros at 5 Hz, 100 Hz and 200 Hz. The approximate phase of the system response at 20 Hz is
Q8.Non-minimum phase transfer function is defined as the transfer function
Q9.Consider a causal second-order system with the transfer function \(G(s)=\frac{1}{s^2+2 s+1}\) with a unit-step \(R(s)=\frac{1}{s}\) as an input. Let c(s) be the corresponding output. The time taken by the system output c(t) to reach 94% of its steady-state value \(\displaystyle \lim _{t \rightarrow \infty} c(t)\), rounded off to two decimal places, is
Q10.The output of a standard second-order system for a unit-step input is given as \(y(t)=1-\frac{2}{\sqrt{3}} e^{-t} \cos \left(\sqrt{3} t-\frac{\pi}{6}\right)\). What is the transfer function of the system?
Important Exam
Super Coaching
Exams
Previous Year Papers
Test Series
Objective Questions
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
[email protected]
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Our Apps
Follow us on
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Get Free Access Now
Hot Links： all teen patti real cash teen patti teen patti master official teen patti game